-
-
-
Blog
-
Contact Us
What aspects should be considered in the pipeline design of wastewater treatment plant equipment?
Release time:
2021-06-21
I believe that everyone is familiar with wastewater treatment equipment from manufacturers, but for those who want to further understand the relevant knowledge of wastewater treatment equipment, when purchasing and using equipment from wastewater treatment manufacturers, it is important to have a clear understanding and not rush into things. I hope this will be helpful to you.
I believe everyone is familiar withwastewater treatment plant equipmentAlthough you are familiar with the equipment, for those who want to further understand the relevant knowledge of wastewater treatment plant equipment, having a clear mind when purchasing and using the equipment is important; don't rush. I hope this helps you.
wastewater treatment plant equipmentThe layout of the equipment drainage system depends on the terrain, soil conditions, river conditions, wastewater type, and pollution level; the cross-sectional size of the pipe network should be designed according to the long-term planned flow rate, and the needs of the village's long-term development should be considered. In cases where the pipeline is short and the burial depth is small, try to allow the wastewater to drain automatically; make full use of the terrain, laying the main pipe at the bottom of the entire drainage area to facilitate the inflow of wastewater into the branch pipes; wastewater pipes should use gravity flow to avoid lifting; when the burial depth is large, intermediate pumping stations should be set up to pump water, but the burial depth should be as small as possible, and the number of pumping stations should be minimized; the direction and number of wastewater main pipes depend on the location and number of wastewater treatment plants and outlets. If there is only one wastewater treatment plant in the area, only one main pipe is laid; the pipeline route should minimize crossings with rivers, valleys, railways, and various underground structures, and fully consider the influence of geological conditions.
Wastewater main pipes are generally arranged along main roads and should not be located in open areas without roads. They are usually located under sidewalks, green belts, or slow lanes on the side with a large amount of wastewater or fewer underground pipelines; the pipeline layout should be simple, straight, and without bends, minimizing the length of large-diameter pipelines; the pipeline layout should consider the short-term and long-term planning and phased construction of the village, so that the pipeline layout and laying can meet the requirements of the current construction and consider the possibility of future expansion.
wastewater treatment plant equipmentThe equipment has several advantages and prominent features:
1. Due to the porosity of the porous ceramic particles, the amount of water involved in the wastewater microcapsule degradation is increased compared to other microcapsules and other carrier forms.
2. Supports the upward operation of wastewater ceramic filters, air, and micro-wastewater, with good gas dispersibility and high oxygen transport efficiency.
3. The sludge is older than the ceramic filter, with less contact oxidation, less sludge production, a large contact area between sludge and wastewater, and poor meltability.
4. The filter bed can remove wastewater produced during the flocculation decomposition process, reducing the oxidation process and improving the effect.
5. The ceramic filter is layered along the direction of flow in the filler bed, with high water activity, good stability, low-temperature operation, and a large impact load.
6. Low-cost domestic wastewater treatment equipment, which can omit the oxidation decomposition and secondary sedimentation processes, reducing construction costs.
7. Domestic wastewater with micro-high emission concentrationswastewater treatment plant equipmentThe equipment filters the formed filler particles, allowing fine water to survive and increase the fine water concentration, and the replacement of the processor biomembrane will provide a good environment and stable operation.
Quotation, Sales Hotline:0514-80913965 / 80913966
After-sales service:0514-80913977 / 80913979
Sales Hotline:0514-80913965 / 80913999
Technical Support:0514-80913952 / 80913953
Sales Fax:0514-80913999/86166402
Production base: Zhenwu Town, Jiangdu District, Yangzhou City, Jiangsu Province (Binhu)
Group Headquarters: Taishan East Road, Jiangdu District, Yangzhou City
Company E-mail:tianyugroup@vip.163.com
Sweep the attention to us