-
-
-
Blog
-
Contact Us
Characteristics of a spiral sand-water separator
Release time:
2021-06-28
1. The sedimentation and sand conveying devices of the spiral sand-water separator have a closed structure, characterized by compact structure, light weight, high operational reliability, and low maintenance workload. 2. The separation efficiency of the spiral sand-water separator can reach 96%~98%, particles with a diameter of 0.2 mm can be separated, and the recovery rate is not less than 98%; the removal rate of gravel with a diameter greater than 0.1 mm is not less than 80%.
1.Spiral Sand-Water SeparatorThe sedimentation and sand conveying devices are enclosed structures, featuring compact structure, light weight, high operational reliability, and low maintenance.
2. The separation efficiency of the spiral sand-water separator can reach 96%~98%, separating particles with a diameter of 0.2 mm, with a recovery rate no less than 98%; the removal rate of gravel with a diameter greater than 0.1 mm is no less than 80%.
3. Under normal conditions, the performance of the sand-water separator is comparable to that of a pump-type sedimentation tank and a sand storage chamber with a sand pump. Continuous operation is also possible if necessary.
4.Spiral Sand-Water SeparatorThe shell, frame, sand conveyor and other important components are made of stainless steel. The conveying auger in the U-shaped trough is an axialless auger, and its structural design ensures material circulation and prevents blockage; the axialless screw has sufficient strength and rigidity to ensure that it will not deform or elongate under working load.
5. The axialless spiral supporting bearing of the spiral sand-water separator is waterproof, dustproof, wear-resistant, and self-lubricating.
6. The separation tank of the spiral sand-water separator is made of stainless steel, with a semi-circular bottom for supporting the spiral conveyor. The inlet and overflow pipe are installed at the top of the container, and the drain pipe is installed at the bottom for easy maintenance. All fittings and flanges are made of stainless steel.
7.Spiral Sand-Water SeparatorThe diameter of the inlet and outlet pipes is designed to prevent blockage by debris in the water.
8. The sand separator and auxiliary components are configured for both continuous and intermittent operation.
9. A sufficient number of replaceable liners are installed inside the spiral trough of the U-shaped trough, with a simple structure, long service life, and easy replacement.
10. There are no high-speed rotating parts in the equipment, so the screw wear is low and almost no maintenance is required.
11. The spiral sand-water separator drive device uses a shaft-mounted reducer, and the output shaft is directly connected to the screw.
If you want to make mud and stone into stones or sand, first clean the soil from the stones, so that the quality of the finished stones or sand will be higher. If dry soil is better, the material of wet clay is not easy to clean.
However, don't worry too much.Spiral Sand-Water SeparatorIt is for this purpose! During the use of this soil and stone separation equipment, other mechanical equipment should be operated in coordination with each other. The configuration Price of each soil and stone separation equipment is different, so the Price of the equipment will naturally be different. It is recommended that customers purchase equipment according to their own production needs.
Quotation, Sales Hotline:0514-80913965 / 80913966
After-sales service:0514-80913977 / 80913979
Sales Hotline:0514-80913965 / 80913999
Technical Support:0514-80913952 / 80913953
Sales Fax:0514-80913999/86166402
Production base: Zhenwu Town, Jiangdu District, Yangzhou City, Jiangsu Province (Binhu)
Group Headquarters: Taishan East Road, Jiangdu District, Yangzhou City
Company E-mail:tianyugroup@vip.163.com
Sweep the attention to us