-
-
-
Blog
-
Contact Us
Measures for the protection of bar screen cleaners and methods for lubrication, maintenance, and repair
Release time:
2022-07-08
The bar screen cleaner consists of components such as a template support, traction belt chain, transmission device, grinding tooth a, grinding tooth b, underwater guide wheel, underwater sub-rack, and bars. Below, we will learn about the protective measures for the bar screen cleaner and its lubrication, maintenance, and maintenance methods.
Bar Screen CleanerComposed of components such as template support, traction belt chain, transmission device, and grinding teeth a, grinding teeth b, underwater guide wheel, underwater sub-rack, and rack bars. So, let's learn about the protective measures and lubrication and maintenance methods for bar screen cleaners.
1. The bar screen cleaner itself is an integrated structure, assembled and debugged on a dedicated service platform. Debugging can be completed in 8 hours, ensuring assembly quality and simplifying on-site installation work.
2. This machine adds another main rack active sub-rack in front of the main rack bar, with the same spacing as the main rack bar. The long rake obtains the screen residue from the main rack active sub-rack, reasonably avoiding screen residue from piercing the bottom end of the rack bar and the retention of waste at the bottom end.
3. The transmission chain uses a high-quality wide transmission chain made of stainless steel. The transmission chain safety performance is not less than 6, and it is equipped with chain wheel chain tension adjustment equipment. Running in the chain groove, it does not need to lift another row of slag resistance equipment, it can only reasonably avoid slag winding around the chain groove, preventing jamming problems.
4. The transmission system is installed at the front of the sound card rack, using a manhole cycloidal pinwheel reducer and a torque protector (knife pin) to reasonably avoid overload damage to the motor reducer. Because it is equipped with a protective cover, disassembly is simple.
5. Two types of cleaning rakes are selected: a long rake and a short rake. The long rake has a large water volume, and the short rake performs a complete rake cleaning.
6.Bar Screen CleanerInstall overvoltage protection equipment for home appliances. When the machinery equipment encounters common faults or overloads, it automatically shuts down the power and sounds an alarm. The software system is agile and reliable.
The bar screen cleaner is made of two materials: polyester and stainless steel plate. The rack teeth shaft and transmission chain, etc., are made of stainless steel plate, greatly improving the overall corrosion resistance of the grid. Grid teeth made of stainless steel plate are usually used for grids with small gaps. Through the start of the machinery, the rake takes the dirt enclosed on the surface of the fence from top to bottom. When the rake brakes and exercises from top to bottom, the dirt falls down automatically under the action of force, falling from the spout into the belt conveyor or waste car, and then transported or deeply processed. All parts bases are made of alloy steel, with high compressive strength and wear resistance. Even when used in natural environments, its service life is not easily affected. Using grid columns to fix the machinery, and using the intermediate tooth method for operation, can reasonably prevent waste problems.
Bar screen cleaner improved protection measures and its finishing maintenance, long-term maintenance:
The maintenance of parts removes dirt from the bar screen cleaner, and the operation is very efficient. In addition to lubrication and maintenance, each component is inspected and maintained. Friction of each component is unavoidable during operation, and there will certainly be damage. Immediately inspect, check, disassemble, and replace parts. Work performance is greatly affected, and its effect in wastewater treatment cannot be fully utilized. Pay attention to maintaining the efficient operation of the machine.
The above is an introduction toBar Screen Cleanerprotective measures and lubrication and maintenance methods. For more information, please feel free to Contact Us! Our company has many years of experience and is always looking forward to your participation.
Quotation, Sales Hotline:0514-80913965 / 80913966
After-sales service:0514-80913977 / 80913979
Sales Hotline:0514-80913965 / 80913999
Technical Support:0514-80913952 / 80913953
Sales Fax:0514-80913999/86166402
Production base: Zhenwu Town, Jiangdu District, Yangzhou City, Jiangsu Province (Binhu)
Group Headquarters: Taishan East Road, Jiangdu District, Yangzhou City
Company E-mail:tianyugroup@vip.163.com
Sweep the attention to us