-
-
-
Blog
-
Contact Us
The correct operation method of a spiral sand-water separator
Release time:
2022-09-19
During the use of a spiral sand-water separator, we will inevitably damage the equipment. So at this time, how should we get rid of it? If we really encounter damage in life, it is usually more troublesome to repair, so we should avoid this situation. Here is a detailed introduction for you. When using a spiral sand-water separator, we should operate it correctly according to the requirements, because if you use it in an accurate way, its integrity can be avoided. If the equipment is damaged, we should not panic, because you need to know that current machines generally have some problems and troubles during use. If problems occur during operation, the power should be turned off immediately. In this way, you can also avoid some more serious problems. Pay attention to cleaning at ordinary times. After cleaning the reducer, we should wipe it with a cloth. It needs to be well maintained. This can reduce its failure rate. It should be noted here that when installing the spiral sand-water separator, it is recommended that everyone pay attention to the coaxiality of its input shaft and output shaft and the shaft of its connecting part, so its error cannot be greater than the allowable value of the coupling used. If you know nothing about this, you can also consult the customer service staff here. I believe they will also help you answer your questions. I hope you are running
During usespiral sand and water separatorIn the process, we will inevitably damage the equipment. So at this time, how should we get rid of it? If we really encounter damage in life, it is usually more troublesome to repair, so we should avoid this situation. Here is a detailed introduction for you.
When using a spiral sand and water separator, we should operate it correctly according to the requirements, thinking that if you use it in an accurate way, then its integrity can be avoided. If the equipment is damaged, we should not panic, because you need to know that today's machines generally have some problems and troubles during use. If problems occur during operation, the power should be turned off immediately. In this way, you can also avoid some more serious problems. Pay attention to cleaning at ordinary times. After cleaning the reducer, we should wipe it with a cloth. It needs to be well maintained. This can reduce its failure rate. It should be noted here thatspiral sand and water separatorDuring installation, it is recommended that everyone pay attention here to the coaxiality of its input shaft and output shaft shafts and the shafts of the connecting parts, so the error cannot be greater than the allowable value of the coupling used. If you know nothing about this, you can also consult the customer service staff here. I believe they will also help you answer your questions. I hope you will have a good understanding before running.
In order to avoid problems in the later use of the spiral sand and water separator, it is recommended to manually rotate it before the official start. At this time, it also needs to be flexible and free of clamping. In this case, the no-load operation should be carried out for at least two hours. In fact, as long as you do these things well, you will avoid them. In addition, you also need to pay attention to the fact that there should be no impact, vibration, noise, oil leakage, etc. during operation, and faults should be eliminated in time. In addition, for the staff, we also need to pay attention that after the formal use, whenspiral sand and water separatorAfter about 20 days or 400 hours of continuous work, it is recommended that you replace the new lubricating oil. After replacement, regular inspection is required. As long as you follow the editor's instructions, there will be no problems. It is also recommended here to change the lubricating oil every three months or 5000 hours. For reducers that work less than 8 hours a day, they need to be changed every 6 months. Nowadays, as a manufacturer of spiral sand and water separators, the Price here is very reasonable, and the quality is guaranteed. If your industry needs it, you can have a look. Friends who need to order may come here and have a look.
The content of the above article is about the correct operation method of the spiral sand and water separator introduced by the editor. Today's knowledge points are here. I hope you can buy your favorite product. At the same time, you can also communicate with us. We will do our best to design a product that suits your needs.
Quotation, Sales Hotline:0514-80913965 / 80913966
After-sales service:0514-80913977 / 80913979
Sales Hotline:0514-80913965 / 80913999
Technical Support:0514-80913952 / 80913953
Sales Fax:0514-80913999/86166402
Production base: Zhenwu Town, Jiangdu District, Yangzhou City, Jiangsu Province (Binhu)
Group Headquarters: Taishan East Road, Jiangdu District, Yangzhou City
Company E-mail:tianyugroup@vip.163.com
Sweep the attention to us