-
-
-
Blog
-
Contact Us
Working principle of a spiral sand-water separator
Release time:
2022-09-26
With the continuous advancement of science and technology, all walks of life have also developed greatly. The development prospect of the spiral sand-water separator is also very good, so the demand is increasing, and there are more and more manufacturers on the market. As a manufacturer, it is also very necessary for us to tell you about its small knowledge points here. Interested partners can come and have a look. Before we use this spiral sand-water separator, there are also many problems accompanying everyone, so in order to use it better, we must understand some of its knowledge points. You should know that the spiral sand-water separator is suitable for sedimentation tanks in sewage treatment plants. It is an integrated equipment for the promotion of organic sand separation in sewage, and can also separate particles with a particle size ≥0.2mm during use. It has high separation efficiency, the equipment adopts a shaftless screw, there are no bearings in the water, and it has the characteristics of light weight, compact structure, reliable operation, and convenient installation during use. It is an ideal sand-water separation equipment. In addition, the installation angle of the spiral sand-water separator is between 20° and 30°. At this time, when the sand-water mixture enters the water tank from the inlet pipe, particles with a larger mixing ratio (such as sand and gravel) will settle at the bottom of the spiral groove due to gravity. It can be spiral-shaped, driven by the material along the diagonal of the bottom of the U-shaped groove.
With the continuous advancement of science and technology, all walks of life have also made great progress.Spiral sand and water separatorIts development prospects are also very good, so the demand is constantly increasing, and there are more and more manufacturers on the market. As a manufacturer, it is also very necessary for us to tell you about its small knowledge points here. Interested partners can come and have a look.
Before we use this spiral sand and water separator, there are also many problems accompanying everyone, so if you want to use it better, you must understand some of its knowledge points. You should be clear thatSpiral sand and water separatorIt is suitable for sedimentation tanks in wastewater treatment plants. It is an integrated device for the promotion of organic sand separation in wastewater, and it can also separate particles ≥0.2mm in size during use. It has high separation efficiency, the equipment uses a shaftless screw, there is no bearing in the water, and it has the characteristics of light weight, compact structure, reliable operation, and easy installation during use. It is an ideal sand and water separation equipment. In addition, the installation angle of the spiral sand and water separator is between 20° and 30°. At this time, when the sand-water mixture enters the water tank from the inlet pipeline, the larger particles (such as sand and gravel) in the mixture, due to gravity, fall and accumulate at the bottom of the spiral groove. It can be spiral-shaped, driven by the material along the diagonal line at the bottom of the U-shaped groove, and after leaving the liquid level, continue to move upward for a certain distance. The water in the sand and gravel gradually flows back into the tank through the gaps in the spiral groove, which will cause the sand and gravel to gradually dry at the outlet, and enter other conveying devices according to its weight. The supernatant continues to flow out of the drain pipe. The purpose of sand and water separation is achieved.
The spiral sand and water separator consists of a shaftless screw, liner, U-shaped groove, water tank, guide plate, weir, and drive device. Of course, during manufacturing, the mixture of sand and water enters the water tank from the top of the separator. The relationship between the mixtures is relatively large, such as sand will accumulate at the bottom of the trough, so it can naturally also be on the screw, driving the sand to rise along the bottom of the inclined trough, continuing to walk a distance after leaving the liquid level, and discharging the sand into the sand hopper after sufficient dehydration. The water separated from the sand and water is discharged from the overflow port and sent to the factory water tank. Its characteristics are that the separation efficiency can reach 96%~98%, the spiral sand and water separator can separate materials with a particle size ≥0.2mm; it also uses a shaftless screw, there is no bearing in the water, and maintenance is convenient; the structure is compact and light in weight; it also has some new transmission devices, and the key production component—the reducer is an advanced shaft-type, no coupling is required, and the spiral sand and water separator is easy to install in the center; its liner is a quick loading type, easy to replace; the spiral axial position is adjustable, which is convenient for adjusting the safe clearance between the machine tail and the tank wall.
The above article introduces the working principle of the spiral sand and water separator for all friends. Friends who see this can read it carefully. Of course,Spiral sand and water separatorThere is still a lot of information. We will continue to update it later. If you still don’t understand, you can consult at any time. Here, we welcome new and old customers to visit our company for inspection, and then choose the equipment that suits you.
Quotation, Sales Hotline:0514-80913965 / 80913966
After-sales service:0514-80913977 / 80913979
Sales Hotline:0514-80913965 / 80913999
Technical Support:0514-80913952 / 80913953
Sales Fax:0514-80913999/86166402
Production base: Zhenwu Town, Jiangdu District, Yangzhou City, Jiangsu Province (Binhu)
Group Headquarters: Taishan East Road, Jiangdu District, Yangzhou City
Company E-mail:tianyugroup@vip.163.com
Sweep the attention to us